ordered a birthday present for myself

Founding Member Location: Naperville, IL Posts: 3436

jesse031081 wrote:

so jt what sways would you go with for my car i dont plan on doing what you do but would like a stiffer ride at a reasonable price. i figure the guy has to have it all apart when doing the springs i might as well do sways. thanks bro

well i researched both sway bars quite a bit and like i said the stack chubby sways are what i went with. stack performance sells the hotchkis sways too. they believe the hotchkis bars are great and still sell them even tho they make their own. they felt looking at the hotchkis bars that they could improve on the design. one other lxforums member switched from hotchkis to stack bars and said they are better so thats what i went with. i have only driven the car once since putting them in but it was an instant massive difference. i should have done it a long time ago.

you cant go wrong with either the stack or hotchkis bars. both are a great upgrade over stock. another thing to think about is that from what i hear the hotchkis bars squeak a lot unless you lube them very often.

i do plan to complement them with the bwoody end links soon.

if i remember correct both bars are 150% stiffer that stock in the rear, but they differ on the front. the stack sways are 100% stiffer than stock on the front where the hotchkis are 30% stiffer than stock.

_________________

2006 black /SRT//8/
12.521 @ 112.263 MPH (corrected time)
2nd place SRT8 shootout Great Lakes Dragway 2008 / 2nd place Maywood Park AutoX 2009
http://www.youtube.com/watch?v=CjQeby5cB1Q / http://www.youtube.com/watch?v=v0So5e-GGXM

Founding Member Location: Naperville, IL Posts: 3436

jesse031081 wrote:

ok so my neighbor didnt order the mopar one yet, he just got me the price so i just ordered http://www.razorsedgemotorsports.com/raedsttobrdo.html thanks jon this style looks stronger and was $40 cheaper

awesome.

that bar was a nice improvement for sure. really stiffens up the feel over bumps when in corners and stuff. but when i say the strut bar was a big improvement the sways were a massive improvement. they eliminate almost all body roll instantly. if you did both at once it would be awesome.

_________________

2006 black /SRT//8/
12.521 @ 112.263 MPH (corrected time)
2nd place SRT8 shootout Great Lakes Dragway 2008 / 2nd place Maywood Park AutoX 2009
http://www.youtube.com/watch?v=CjQeby5cB1Q / http://www.youtube.com/watch?v=v0So5e-GGXM

CAMM All-Star Location: Wisconsin Posts: 1523

http://www.stackperformance.com/store/products/Stack_Performance_Chubby_Sway_Bars-132-38.html do you pretty much need a lift to install these or could a couple of us do this at a mod night

Founding Member Location: Naperville, IL Posts: 3436

jesse031081 wrote:

http://www.stackperformance.com/store/products/Stack_Performance_Chubby_Sway_Bars-132-38.html do you pretty much need a lift to install these or could a couple of us do this at a mod night

bastards! figures they would go on sale after i buy em for full price last month. bat

oh well. thats a steal of a price. with the special price i would for sure do those over the hotchkis bars if i were you.

as far as driveway install...yea i dunno. the rear will be pretty hard without a lift but we could do it. a lift made it easy. the thing that would be a pain in the ass not to have is a compressor with a gun.

we had to drop one side of the cradle, drop the brake line brackets from the frame, take out one shock and spring and fish the stock bar out and the new one back in.

_________________

2006 black /SRT//8/
12.521 @ 112.263 MPH (corrected time)
2nd place SRT8 shootout Great Lakes Dragway 2008 / 2nd place Maywood Park AutoX 2009
http://www.youtube.com/watch?v=CjQeby5cB1Q / http://www.youtube.com/watch?v=v0So5e-GGXM

CAMM All-Star Location: Wisconsin Posts: 1523

wow sounds like i might just wait for adam to get established at a new job and let him have at it. the price is right for sure

Founding Member Location: Naperville, IL Posts: 3436

jontoad wrote:

ChiTownHemi wrote:

I have the techco brace and have had no problems with it. They are still in biz as far as I know.

http://www.techcointl.com/

But like Jon says, looking back on it, not utilizing the existing "shitty" bar is probably the way to go if you're looking for the best performance.

ah ok. i dunno why but i thought i remember posts about the supecharger not being an option any more when people were asking about what blower to get on lxforums... my bad.

I'm seeing more posts about how techco went out of business and that you cant get their products anymore... i dunno why their website is still up then... see post #2 at this link...

http://www.lxforums.com/board/showthread.php?t=209315

_________________

2006 black /SRT//8/
12.521 @ 112.263 MPH (corrected time)
2nd place SRT8 shootout Great Lakes Dragway 2008 / 2nd place Maywood Park AutoX 2009
http://www.youtube.com/watch?v=CjQeby5cB1Q / http://www.youtube.com/watch?v=v0So5e-GGXM

CAMM All-Star Location: Chicagoland Area Posts: 1103

Yeah.. I'd have to say it doesn't look good for Techco. Their site says they're re-locating but hasn't been updated since last August. Their phones are down and it doesn't look like they are taking new orders. Too bad because I've heard a lot of good reviews of their products.

jontoad wrote:

ChiTownHemi wrote:

I have the techco brace and have had no problems with it. They are still in biz as far as I know.

http://www.techcointl.com/

But like Jon says, looking back on it, not utilizing the existing "shitty" bar is probably the way to go if you're looking for the best performance.

ah ok. i dunno why but i thought i remember posts about the supecharger not being an option any more when people were asking about what blower to get on lxforums... my bad.

I'm seeing more posts about how techco went out of business and that you cant get their products anymore... i dunno why their website is still up then... see post #2 at this link...

http://www.lxforums.com/board/showthread.php?t=209315

CAMM All-Star Location: On The Highway To Hell Posts: 4588

There phone is still on, just says there is no one there to take the call, lol.

CAMM Member Location: Hainesville, IL Posts: 1551

jesse031081 wrote:

wow sounds like i might just wait for adam to get established at a new job and let him have at it. the price is right for sure

That sounds fine to me man, I will be doing an install in the near future, not at my new job BUT at a location with a lift and a compressor. I just want to "clear" it with him just to make sure it's cool ya know man?

» Backyard Wrestling Past, Present, and Future
» Steve's Birthday!
» HAPPY BIRTHDAY BLAZE!!!!!!!!!!!
» cupcakes and birthday cakes
» Happy Birthday, Hinkel!

ordered a birthday present for myself

ordered a birthday present for myself

Similar topics

Similar topics