|
| Author | Message |
|---|
arivera CAMM Member

Location: Joliet Posts: 71
 | Subject: H.I.D. questions 10th April 2011, 9:05 pm | |
| I would like to get an HID conversion kit for my ride.
1. What kit is recommended?
2. Will there be flicker?
3. How much?
4. how difficult is the install?
And
5. I don't what blue. I want white. I can only assume this is 8500K. COrrect?
I only ask this because my brother in-law bought some on eBay and they look like crap. |
|
 | |
beach CAMM Member
Location: Bristol, IL. Posts: 83
 | Subject: Re: H.I.D. questions 10th April 2011, 9:24 pm | |
| I bought mine from HID nation. Customer service sucked. I had questions and they told me to look it up myself. Other than that they work great now. I had flicker and had to install a resister from Radio Shack in the relay harness. I don't remember the part #. BTW 6k is white, which is what I have also. Another issue I found, was that when I plugged into the factory plugs, the fog lights wouldn't work. I had to plug them in opposite or reverse to how they should be. The tab that clicks, is now on the opposite side. I looked up my questions on the LX forum before I found this one. Good luck. |
|
 | |
Moparcharger06 CAMM Member

Location: Hainesville, IL Posts: 1551
 | Subject: Re: H.I.D. questions 10th April 2011, 9:43 pm | |
| Talk to The Black Stig, he knows his shit when it comes to HIDs, But I got 6000K and they have just a small hint of a purple/blue, but mostly white for the most part. I really like them |
|
 | |
Dave13 CAMM Member
Location: Romeoville Posts: 25
 | Subject: Re: H.I.D. questions 10th April 2011, 10:47 pm | |
| 4.3k is white. That is what is on stock vehicles.
http://www.optionimports.com/itemMatrix.asp?GroupCode=HIDKIT&eq=&MatrixType=1 |
|
 | |
HemiMag CAMM All-Star

Location: Chitown Burbs,IL Posts: 2784
 | Subject: Re: H.I.D. questions 11th April 2011, 2:06 am | |
| 4500k,5000k are true white. 6000k is only slightly blue at start up but once at warm temp its white. Also it all depends on which vendor as they all differ from kelvin color a tad bit. No flicker if you get HID capacitors.Also this depends on which vendor.Some carry them and some don't Install can get tedious but its all repetition...(I can help  ) Pm me and I can help with more info  |
|
 | |
Dave13 CAMM Member
Location: Romeoville Posts: 25
 | Subject: Re: H.I.D. questions 11th April 2011, 2:23 am | |
| Rudy (Rudedog74) knows hid upside-down. But trying to get a hold of him is as hard as getting rid of herpes. |
|
 | |
HEMI UP CAMM Member

Location: South Holland, IL Posts: 160
 | Subject: HID 11th April 2011, 12:59 pm | |
| DDM MOTORING best price they have all you need install is plug and play install about 1/2 hour if that long |
|
 | |
arivera CAMM Member

Location: Joliet Posts: 71
 | Subject: Re: H.I.D. questions 15th April 2011, 9:13 pm | |
| Thanks for the info i got so far. I will need to put this on a brief hold. My grandmother passed away on Wednesday so i need to help my mom get things done. Will talk to you guys again soon.
Tony |
|
 | |
inkedup CAMM All-Star

Location: later'ville Posts: 2896
 | Subject: Re: H.I.D. questions 15th April 2011, 9:28 pm | |
| Tony,sorry to hear aout your grandma. |
|
 | |
HemiMag CAMM All-Star

Location: Chitown Burbs,IL Posts: 2784
 | Subject: Re: H.I.D. questions 15th April 2011, 11:04 pm | |
| Tony sorry to hear about your grandma, you and your family will be in my prayers |
|
 | |
Illinois Chaos CAMM All-Star

Location: On The Highway To Hell Posts: 4588
 | Subject: Re: H.I.D. questions 16th April 2011, 11:13 am | |
| Everything on this site is top notch shit and they work. No drama and no flickering.
http://www.autolumination.com/hid.htm |
|
 | |
5.7daytona CAMM Member
Location: Chicago, IL Posts: 108
 | Subject: Re: H.I.D. questions 18th April 2011, 9:16 pm | |
| so which system did you guys get from the autolimination?? i am also looking into switching out the projector headlights i got from DashZ because of the driver side halos burnt out, so i figure i will go back to my original headlights and just go HID. |
|
 | |
Illinois Chaos CAMM All-Star

Location: On The Highway To Hell Posts: 4588
 | Subject: Re: H.I.D. questions 19th April 2011, 6:47 am | |
| All I needed was a good wiring harness. My car came with HID kit. I just changed bulbs and harness. It's all good Japanese stuff. Watch out for Taiwan or Chinese kits cuz they are junk. |
|
 | |
HemiMag CAMM All-Star

Location: Chitown Burbs,IL Posts: 2784
 | Subject: Re: H.I.D. questions 19th April 2011, 10:51 am | |
| | 5.7daytona wrote: | | so which system did you guys get from the autolimination?? i am also looking into switching out the projector headlights i got from DashZ because of the driver side halos burnt out, so i figure i will go back to my original headlights and just go HID. |
Pm me and I'll point you to the right direction |
|
 | |
The Black Stig Supporting Vendor

Location: Lakemoor Posts: 539
 | Subject: Re: H.I.D. questions 19th April 2011, 12:55 pm | |
| I can do the same pricing plus shipping as illumation and it will come with everything you need.
What year is your car
And i also have 4.3K in stock there is no blue in it period ($5 more)
4 Year warranty out the door, and lifetime if we install it. _________________ http://www.facebook.com/pages/BlackWater-MotorWerks/127543833960263  |
|
 | |
Illinois Chaos CAMM All-Star

Location: On The Highway To Hell Posts: 4588
 | Subject: Re: H.I.D. questions 19th April 2011, 1:22 pm | |
| The worst thing you can do to HID systems is to have your lights flash when you lock the doors or having anything else set to flash them on and off. They only have so many starts in them. |
|
 | |
The Black Stig Supporting Vendor

Location: Lakemoor Posts: 539
 | Subject: Re: H.I.D. questions 20th April 2011, 7:37 am | |
| werd^^^ _________________ http://www.facebook.com/pages/BlackWater-MotorWerks/127543833960263  |
|
 | |
arivera CAMM Member

Location: Joliet Posts: 71
 | Subject: Re: H.I.D. questions 25th April 2011, 6:12 am | |
| I have an 07. Most likely will have them installed by you.give me some time though. Will need to get the money together first. Can you PM me the total? |
|
 | |
|