so the two slots at the top of dash were bezel clips in,its not metal dont know why they didnt make it metal but its kinda like rubberish if someone was to crack it how would he fix it
? suggestions

Pics??????

I can draw it for you I'm not taking apsrt till I fix it.

super glue it... i think i know which part you're talking about... just superglue the part back together..

Which part of the dash are you talking about? Above the steering wheel or by the radio?

Bezel arounf radio.it clips inti two slots there not metal .

it clips into to two slots made of the same vinyl/plastic material as the dash, up near the top of the bezel. They don't really hold much of anything really.. but take some superglue, and just glue the two pieces back together.

yeah that the pc im afraid to take apart again im having issues with led inside and my luck with superglue its breaks again no matter what....but thats for sure an idea

if its already broken, you can't really break it anymore. just take the bezel out, glue it, and reassemble once the glue is dry. How are you removing the bezel anyway? The easiest way that i found to remove it was to grab on the little cubby hole and pull forward until the 2 bottom clips pop, then, taking a small pocket screwdriver or similar tool, slide up each side of the bezel until i feel a clip, then pop each clip with the screw driver. Ive had my bezel out about 10 times already, and i havent broken it yet.

A grabbed a small screwdriver threw it over shoulder.then used the cubby hole and gently pulled.it has been removed alot .....:-)

ok,the first time i actually used superglue and it actually held ,i fixed the rubber/plastic pc.i took the panels off again and saturated the pcs really good the middle of the pc was like a sponge and it absorbed the glue and it held.now i stil want to fix a few more interior pcs that have been removed and left unaligned within the next few weeks but i really would like a hand with that please